====== Install OnlyOffice Docs on Ubuntu server 22.04 ====== Step By Step See: [[install_nettools_upbuntu_server_get_ifconfig_command|Install NetTools on Ubuntu Server to enable ifconfig command]] sudo apt install net-tools Check the current dynamically assigned version 4 IP address on the server using ifconfig command. ifconfig eno1: flags=4163 mtu 1500 inet 192.168.2.163 netmask 255.255.255.0 broadcast 192.168.2.255 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 See: [[configure_static_ip_address_ubuntu_server_22_04|Configure Static IP Address on Ubuntu Server 22.04]] Make a backup the network configuration installer file. $ cd /etc/netplan/ user@svr:/etc/netplan$ ls 00-installer-config.yaml user@svr:/etc/netplan$ sudo cp -v 00-installer-config.yaml 00-installer-config.bak '00-installer-config.yaml' -> '00-installer-config.bak' user@svr:/etc/netplan$ ls 00-installer-config.bak 00-installer-config.yaml user@svr:/etc/netplan$ user@svr1:/etc/netplan$ sudo vim 00-installer-config.yaml Here is the original dhcp configuration for eno1. # This is the network config written by 'subiquity' network: ethernets: eno1: dhcp4: true version: 2 Change this configuration to the following: # This is the network config written by 'subiquity' network: renderer: networkd ethernets: eno1: addresses: - 192.168.2.163/24 routes: - to: default via: 192.168.2.1 nameservers: addresses: [8.8.8.8,4.4.4.4,192.168.2.1] dhcp4: no version: 2 Apply the network changes: sudo netplan apply Restart Network Service sudo systemctl restart systemd-networkd.service Run ifconfig to check the static network configuration ifconfig -a eno1: flags=4163 mtu 1500 inet 192.168.2.163 netmask 255.255.255.0 broadcast 192.168.2.255 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 **Install ONLYOFFICE Docs on Ubuntu 22.04** See: [[https://unixcop.com/install-onlyoffice-docs-on-ubuntu-22-04/]] To be continued . . .